pH / Conductivity / Salt / Oxygen Water Quality Data Logger PCE-PHD-1-KIT1

*We may have a couple of units In Stock. Kindly drop your contact details and we will get back to you shortly.

Category :Instrumentation
Sub Category : Meters
Make :PCE
Model :Meter
Product Condition :new
Product Testing Status : Not Applicable
Type : Enquire
Availability : On Enquiry
Warranty :
Datasheet :
Description : pH Measurement automatic 10 ... 40 °C / 50 ... 104 °F Measurement range 0.00 ... 14.00 pH Resolution 0.01 pH Accuracy ± 0.02 pH +2 digits Calibration 2-point calibration (pH4, pH7) Temperature compensation Automatic with additional temperature sensor (0 ... 60 ºC / 32 ... 140 ºF) or manual (0 ... 100 ºC / 32 ... 212 ºF) Redox Measurement Measurement range 1999 ... 0 ... 1999 mV Resolution 1 mV Accuracy ± 0.5 % + 2 digits Conductivity Measurement Measurement range 0 ... 200 μS/cm 0.2 ... 2.0 mS/cm 2 ... 20.0 mS/cm 20 ... 200 mS/cm Resolution 0.1 μS/cm 0.001 mS/cm 0.01 mS/cm 0.1 mS/cm Accuracy ± 2 % of the measurement range + 1 digit Calibration at 1413 μS/cm Temperature compensation Automatic (0 ... 60 ºC / 32 ... 140 ºF) Total dissolved solids (TDS) Measurement Measurement range 0 ... 132 ppm 132 ... 1320 ppm 1320 ... 13200 ppm 13200 ... 132000 ppm Resolution 0.1 ppm 1 ppm 10 ppm 100 ppm Accuracy ± 2 % of the measurement range + 1 digit Temperature compensation Automatic (0 ... 60 ºC / 32 ... 140 ºF) Salt Content Measurement Measurement range 0 ... 20 mg/l (in water) 0 ... 100 % (in air) 0 ... 50 °C / 32 ... 122 ºF Resolution 0.1 mg/l 0.1 % 0.1 °C Accuracy ± 0.4 mg/l ± 0.7 % ± 0.8 °C Calibration In the air Temperature compensation Automatic (0 ... 50 ºC / 32 ... 122 ºF) Electrode usable in the pH range pH 4 ... pH 10 Temperature Measurement Measurement range 0 ... 60 °C/ 32 ... 140 ºF Resolution 0.1 °C Accuracy ± 0.8 °C General Specifications Measurement rate adjustable from 1 second to 8 hours 59 minutes 59 seconds Display LC-Display 52 x 38 mm / 2 x 1.5" Memory flexible via SD card memory 1 ... 16 GB Interface RS-232 Software available as accessory (optional) Power supply 6 x 1.5 V AA batteries / 9 V-power adapter (optional) Operating conditions 0 ... +50 °C / < 85 % r.H. Dimensions 177 x 68 x 45 mm / 7.0 in x 2.7 in x 1.8 in Weight 490 g / 1.1 lbs
pH / Conductivity / Salt / Oxygen Water Quality Data Logger PCE-PHD-1-KIT1
pH / Conductivity / Salt / Oxygen Water Quality Data Logger PCE-PHD-1-KIT1

Product Specifications

pH / Conductivity / Salt / Oxygen Water Quality Data Logger PCE-PHD-1-KIT1 NA
pH / Conductivity / Salt / Oxygen Water Quality Data Logger PCE-PHD-1-KIT1
pH / Conductivity / Salt / Oxygen Water Quality Data Logger PCE-PHD-1-KIT1

0 Reviews

-

Write a review

Please Login to Add Review


Related Products

Indianacart Top