Description : Measuring range Fe: 0 ... 2000 µm
NFe: 0 ... 2000 µm
Accuracy ±(2 % of reading + 1 µm)
Resolution 0.1 µm (<100 µm)
1 µm (>100 µm)
Measurable materials For measurements on iron/steel and non-ferrous metals
Min. radius of curvature convex 5 mm / 0.19"
Min. radius of curvature concave 25 mm / 0.98"
Min. measuring surface Ø17 mm / 0.67"
Min. substrate thickness 0.2 mm / 0.008" (on magnetic materials)
0.05 mm / 0.002" (on non-magnetic materials)
Probe mode Autom. mode with material detection (Fe + NFe)
Magnetic mode (Fe)
Eddy current mode (NFe)
Calibration Multipoint calibration (1 ... 4 points for each group)
Zero-point calibration
Units µm, mm, mils
Data transfer USB 2.0
Memory A volatile measuring group (DIR mode)
Four measuring groups with autom. storage and max. 2000 readings (GEN mode)
Statistical functions Number of measured values, mean, minimum, maximum, standard deviation
Alarm Display when the adjustable upper and lower alarm limits are exceeded
Operating time Autom. shutdown mode (3 min.)
Power supply 3 x 1.5 V AAA batteries
Display 128 x 128 px LCD display
Indicators Battery status
Fault detection
Operating conditions 0 ... +50 °C / 32 ... 122 °F
20 ... 90 % RH non-condensing
Storage conditions -10 ... +60 °C / 14 ... 140 °F
20 ... 90 % RH non-condensing
Dimensions 143 x 71 x 37 mm / 5.6 x 2.8 x 1.5" (L x W x H)
Weight With sensor and batteries: ca. 271 g / 9.5 oz