Description : Functions
PE test (protective conductor) available, error
PP simulation (charging cable coding) open, 13 A, 20 A, 32 A, 63 A
CP simulation (communication line)
A, B, C, D, error
Outputs (only for test purposes)
Measuring connections L1, L2, L3, N, PE
max. 250 / 430 V AC, 10 A
laboratory plug
Schuko connection max. 250 V AC, 10 A
Fuse from the Schuko connection fuse F 10 A / 250 V, 5 x 20 mm / 0.19 x 0.78"
CP signal output ± 12 V PWM
Further specifications
Input voltage 1 phase: 250 V AC / 3 phase 430 V AC,
50 / 60 Hz, max. 10 A
Charging cable connector Type 1 AC charging mode 3, compatible with IEC62196-1
Type 1 or SAE J1772 with vehicle connection
(Type 1, 5 pin, 1-phase)
Charging cable connector Type 2 AC charging mode 3, compatible with IEC62196-2
Type 1 or SAE J1772 with vehicle connection
(Type 2, 7 pin, 3-phase)
Measurement category CAT II 300 V
Protection class IP54
Pollution degree 2
Operating conditions 0 ... 40 °C / 32 ... 104 °F, 10 ... 85% RH, non-condensing
Storage conditions -10 ... 50 °C / 14 ... 122 °F, 10 ... 60% RH, non-condensing
Maximum working height max. 2000 m / 6561 ft
Dimensions (handheld only) 277 x 109 x 63 mm / 10.9 x 4.3 x 2.4"
Weight ca. 1 kg / 2.2 lb